- 安全工程師主要職責是什么 推薦度：
- 相關推薦
安全工程師的職責是什么
安全工程師需要進行深入細致地調查和研究，發現不安全因素，以求消除。小編整理了安全工程師的職責是什么，歡迎欣賞與借鑒。
崗位職責
1.負責項目施工安全管理；
In charge of *** project construction safety management
2.對承包商人員進行入場安全培訓，努力提高施工人員的安全意識和安全技能；
Perform safety induction training for contractors to ensure they comply with site safety procedures and related laws ,so as to reinforce contractors' safety awareness and ability.
3.審查承包商安全管理程序，保證其符合工廠及法律法規要求；
review the safety certification of employer and special equipment and Special operations personnel,and keep them in document
4.現場巡檢，及時發現各項施工活動中存在的不安全行為和不安全狀態，并采取措施予以糾正；
perform safety patrol everyday, inspect all the safety behavior of workers and PPE and working conditions, then push correction and follow all the risks founded .
5.組織項目管理定期進行安全檢查，完成報告并跟蹤；
Organize project managements to carry out regular and special inspection referring to fall protection, electricity ,hoist, welding, scaffolding, crane and PPE and so on. Finish report and keep following
6.參加項目施工安全會議及各類安全技術交底并提出建議;
Participate safety meeting such as jobs start meeting ,tool box meeting and weekly or monthly safety meeting to review the construction safety condition and provide safety advice.
7.熟悉事故管理流程，對各類事故和未遂事故進行調查處理，分析并總結事故根本原因，跟蹤落實整改；
Familiar with accident management workflow, investigate all accidents/incidents and near miss, keep track of the corrective action plan;
8.熟悉工作許可證管理；
Familiar with work permit system;
9.針對高風險作業活動召開風險分析會，提出安全施工建議；
Give comments for high risk activities on construction field and organize risk analysis meeting;
10.熟悉工廠運營期間安全檢查管理，能夠獨立制定檢查計劃并安排實施；
Familiar with safety inspection, make inspection plan and push implementation;
11.熟練運用風險分析工具，如LEC，JHA，5why，ETA，F(xiàn)TA等；
Proficiency in risk analysis tools, e.x. LEC, JHA, 5WHY, ETA, FTA, etc..
12.了解MOC，PSSR，HAZOP，LOPA等工藝安全管理工具；
Understand basic knowledge of MOC, PSSR, HAZOP, LOPA, and other process safety management tools;
13.了解消防相關消防知識；
FF knowledge required;
14.了解項目審批流程。
Understand workflow of new project approval.
Safety Responsibility:
1.推動員工尊重并恪守公司的EHS 規章制度；
Promote staffs to respect and adhere to company's EHS regulations;
2.監控和調查任何EHS不符合項，及時跟進糾正/預防措施，實現持續性改進；
Supervise and investigate any EHS non conformity, follow up corrective / preventive actions, and achieve continuous improvement;
3.辨識和監控工廠運作單元的EHS潛在風險；
Identify and monitor EHS potential risks of plant operation units;
4.計劃、實施和監控與事故、火災及安全生產有關的所有EHS活動；
Plan,implement and monitor all EHS activities related to accidents,fires,and safety in production;
5.參加相關的EHS培訓。
Participate in EHS relevant trainings.
【安全工程師的職責是什么】相關文章：
安全工程師主要職責是什么08-17
監理工程師的職責是什么01-10
注冊安全工程師職責09-14
網絡安全工程師崗位職責01-14
安全工程師崗位職責（通用17篇）08-28
造價工程師工作職責01-10
造價工程師的職責介紹09-29
CFO的崗位職責是什么02-16
內審員職責是什么？01-11