I. Product Overview
Partial discharge is a kind of pulse discharge, which will produce a series of physical phenomena and chemical changes such as optical, acoustic, electrical and mechanical vibration in and around the space of power equipment. These physical and chemical changes accompanying partial discharge can provide detection signals for monitoring the internal insulation state of power equipment. Partial discharge (PD) signals are produced when insulation defects appear in high voltage electrical equipment. Through the detection and analysis of the local discharge signal, it can judge whether there is insulation hidden trouble inside the high voltage electrical equipment, and prevent the further expansion of potential accidents.
Developed by our company YC - 9300 multi-function partial discharge inspection instrument is a kind of multi-functional handheld instruments, it is based on the waves, ultrasound, high frequency and high frequency current detection method, partial discharge situation of test equipment, can be read out partial discharge amplitude and waveform graph, can provide 2 d and 3 d map of storage and read function, etc., Partial discharge of electrical equipment can be better evaluated. Partial discharge inspection instrument is used for local discharge detection of GIS, switch cabinet, transformer, power cable and other electrical equipment. The equipment is portable, easy to operate, and all the tests do not have any impact on the operation of the high-pressure equipment. The product can observe the measured signal in multiple periods, identify the frequency of discharge, and analyze it through a variety of modes, so as to clearly judge the fault.
Partial discharge inspection device adopts a new appearance design, the use of the current more popular Android system, easier to operate and use, in addition to integrate 5 million camera photography function for convenient inspection record; RFID is conducive to expanding the application of the Internet of Things; The discharge type library is integrated internally to facilitate the comparison and verification of discharge conditions.
Two, technical parameters
The host parameter
Number of detectable channels 4 channels:
1 TEV,
One of US,
1 UHF (wireless, optional),
1 HFCT (wireless, optional)
Sampling accuracy: 12bit
Synchronization mode Internal synchronization, external synchronization, optical synchronization
TEV
Detection bandwidth 3m-100mhz
Measuring range 0 ~ 60dB
Measurement error ±2dB
Resolution of 1 db
The maximum number of pulses per cycle is 720
Minimum pulse frequency 10Hz
Output port Standard SMA connects to the host
Non contact US
The center frequency is 40kHz
Resolution of 0.1 uV
Accuracy of + / - 0.1 uV
Measurement range: 0.5uV ~ 1mV
Output port Standard SMA connects to the host
Contact US
Frequency range: 20kHz ~ 300kHz
Output impedance is 50 ω
The detection sensitivity is 0.1mV
Measurement range 0.1mV to 1V
Output port Standard SMA connects to the host
UHF (optional)
The detection bandwidth is 300MHz to 1.5GHz
Output mode BNC interface - Signal conditioning unit, wireless connection to the host
Receiving mode Receiving by the antenna
Transmission mode coaxial cable
Detection sensitivity < -60dbm
HFCT (optional)
Detection bandwidth 1m-30mhz
Transmission impedance >5mV/mA(10MHz)
Output impedance is 50 ω
Measuring range -20~80dB
Measurement error ±1dB
Resolution of 1 db
Output port BNC port - Signal conditioning unit, wireless connection to the host
hardware
LCD 5.0-inch TFT true color LCD
Resolution 800 x 480
Operate touch/keys
Store the TF card
Interface 3.5mm stereo headphone jack
Power supply DC-12v /2A DC power supply
Extended features USB-TypeC/5 million camera /RFID/WIFI/ Bluetooth
The power supply
Internal power supply Battery powered (4800mAH 7.4V)
Normal working time is about 7 hours, full time is about 3 hours
size
Length x width x height 235mm x 133mm x 48mm
Weight is 0.85 kg
The environment
Ambient temperature -20 ° C to 50 ° C
Storage ambient temperature -40 ° C to 70 ° C
Humidity 10%-90% (non-condensing)
The altitude is ≤3000m
After-sales service
Instruments from the date of purchase within 12 months, belong to the company's product quality problems free maintenance, lifelong warranty and technical services. If you find any abnormal condition or malfunction of the instrument, please contact the company in time, so as to arrange a convenient solution for you. After-sale telephone: 15175200555
